Collection: Computer Cases

Mid Tower, E-ATX, ATX/M-ATX/ITX, 485 x 241 x 504 mm, 11.7 kg

Description

Vertical Cooling
Supports up to 10 fans, with large area of vents around lower chamber, allowing for bottom-to-top vertical airflow.

MULTI-DIRECTIONAL AIR INTAKE AND MASSIVE AIRFLOW
Fine mesh on the top and right panel, and a great number of vents on the front, left and bottom of lower chamber provide massive airflow.

PRE-INSTALLED 3 X 120MM ARGB PWM REVERSE FANS & 1 X 140MM ARGB PWM FAN

2 X 360MM RADS
Supports simultaneous installation of 360mm radiators on the top and side.

Side Radiator Installation
Remove the small cover on the PSU shroud to install a side radiator. Overall thickness up to 70mm.

SUPPORT RTX 4090
No interference between side radiator with standard thickness (52mm) and RTX 4090.

ALL REUSABLE FULLY-OPEN PCI SLOT COVERS
Configured with 7 reusable PCI slot covers, which can be turned 90* to mount the GPU vertically (additional riser cable needed).

Support Back-Connect Motherboards
Plug in cables from behind to give front a cleaner look and a smoother airflow channel.

MULTIPLE HARD DRIVES
Supports multiple hard drives, with different compatibility depending on the form factor of installed motherboard, 3 x 3.5" HDD or 5 x 2.5" SSD at most.

CABLE MANAGEMENT
Provides 2 Velcro straps on the back of motherboard to avoid cable clutter, and 2 Velcro straps at the rear for easier management of peripheral cables.

FLIP CABLE COVER
With a cable management space of 32mm and a removable flip-door cable cover, allowing for unobstructed cable management.

SCREW-FREE PANELS WITH CLIP HANDLES
The lower front and lower left feature detachable mesh panels secured by hooks and magnets, with clip handle positions.
Front panel and both side panels are secured by studs and hooks, with clip handle positions at the rear.
Top panel is secured by studs.

DUST FILTER
Front: Magnetic filter
Left: Magnetic filter
Bottom: Full-size pull-out filter

REAR PULL PSU MOUNT & EVA CUSHION PADS
For easier PSU installation and safer operation.

I/O PANEL
Power
LED Control Button
Type-C 10Gbps x 1
Headphone/Mic Combo Jack
USB 3.0 x2

Specifications

Design
Anti-dust filter	Yes
Form factor	Midi Tower
Type	PC
Material	Glass, Plastic, Steel
Number of 3.5" bays	3
Supported motherboard form factors	ATX, EATX, ITX, micro ATX
Product colour	Black
Number of 2.5" bays	2
Number of expansion slots	7
Maximum CPU cooler height	18 cm
Maximum graphics card length	45 cm
Maximum PSU length	21 cm
Power supply
Power supply included	No
Ports & interfaces
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity	2
Cooling
Rear radiator sizes supported	120,140 mm
Top radiator sizes supported	120,140,240,280,360 mm
Side fans installed	3x 120 mm
Number of side fans supported (max)	3
Side fans diameters supported	120,140 mm
Rear fans installed	1x 120 mm
Rear fans diameters supported	120,140 mm
Number of top fans supported (max)	3
Top fans diameters supported	120,140 mm
Number of bottom fans supported (max)	3
Bottom fans diameters supported	120 mm
Side radiator sizes supported	120,240 mm
Pulse-width modulation (PWM) support	Yes
Storage
Supported HDD sizes	2.5,3.5"
Technical details
Product supplier data	2
Weight & dimensions
Width	241 mm
Depth	485 mm
Height	504 mm
Weight	11.7 kg
Packaging data
Package weight	14.2 kg

Silencio S600, Micro-ATX/Mini-ITX/ATX, USB 3.0 x 2, Steel/Plastic/Sound Absorbing Material, Black

Description

The Silencio S600
The Silencio is a silent case that makes no compromises in thermal performance. Sound dampening material surrounds the system build, rubber padding cushions all included fans, and a removable cover shields noise that escapes from the top panel. The Silencio S600 is available with either a tempered glass or a sound-dampened steel side panel.

For demanding systems, the top panel’s Sound Dampening Cover can be removed for increased ventilation. Paired with the front panel’s ventilation, directionally taking in air through the mesh, silence can be accomplished without sacrifice. The subtle ventilation takes in air from three sides of the sound-dampened front door, with the mesh filter aimed toward the bottom for an efficient intake of air.

Sound Dampening Material – Sound dampening material minimizes noise from the pre-installed fans, the power supply, all steel panels, the steel front door, and all storage mounting points for 2.5” and 3.5” drives.

Tempered Glass or Sound-Dampened Steel – The Silencio S600 is available in two versions. Seamless tempered glass to show the system build or sound-dampened steel for optimal noise reduction.

Removable Sound Dampening Cover – The top cover can be removed for increased ventilation or kept in place to reduce noise.

Reversible, Steel Front Door – The sound-dampened, steel front door features a reversible mounting system that is capable of opening in two directions.

SD Card Reader – The I/O Panel features an SD Card Reader for rich connectivity.

Headset Jack – The single 4 pole headset jack features both audio and microphone capabilities simultaneously so that separate jacks are not needed.

Silencio Fans – Two Silencio FP 120mm PWM fans are pre-installed with rubber padding to reduce noise. To connect additional fans, one 4pin 1-to-3 splitter is included.

Graphics Card Support Up To 398mm – Generous clearance space is provided to support the latest graphics cards.

Specifications

Design
Volume	44.8 L
Anti-dust filter	Yes
Form factor	Midi Tower
Type	PC
Material	Plastic, Steel
Number of 5.25" bays	1
Number of 3.5" bays	4
Supported motherboard form factors	ATX, micro ATX, Mini-ITX
Product colour	Black
Number of 2.5" bays	5
Suitable for	Gaming
Side window	No
Reset button	Yes
Illumination	No
Cable management	Yes
Number of expansion slots	7
Maximum CPU cooler height	16.7 cm
Maximum graphics card length	39.8 cm
Maximum PSU length	18 cm
On/off button	Yes
Ergonomics
Reset button	Yes
Cable management	Yes
On/off button	Yes
Power supply
Supported power supply form factors	ATX, PS2
Power supply included	No
Power supply location	Bottom
Ports & interfaces
USB 3.2 Gen 2 (3.1 Gen 2) Type-A ports quantity	0
USB 3.2 Gen 2 (3.1 Gen 2) Type-C ports quantity	0
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity	2
USB 2.0 ports quantity	0
Audio input	Yes
Audio output	Yes
Cooling
Front radiator sizes supported	120,140,240,280 mm
Rear radiator sizes supported	120 mm
Top radiator sizes supported	120,240 mm
Front fans installed	1x 120 mm
Number of front fans supported (max)	2
Front fans diameters supported	120,140 mm
Rear fans installed	1x 120 mm
Number of rear fans supported (max)	1
Rear fans diameters supported	120 mm
Number of top fans supported (max)	2
Top fans diameters supported	120,140 mm
Fan speed	800 - 1400 RPM
Liquid cooling capability	Yes
Storage
Supported HDD sizes	2.5,3.5,5.25"
Compatible memory cards	MMC, SD
Card reader integrated	Yes
Technical details
Harmonized System (HS) code	84733080
Weight & dimensions
Volume	44.8 L
Width	209 mm
Depth	478 mm
Height	470.5 mm
Weight	8.43 kg
Packaging data
Package width	290 mm
Package depth	550 mm
Package height	552 mm
Package weight	9.72 kg
Logistics data
Harmonized System (HS) code	84733080
Other features
Volume	44.8 L
Harmonized System (HS) code	84733080

DeepCool CL6600 WH, Midi Tower, PC, White, ATX, micro ATX, Mini-ITX, Acrylonitrile butadiene styrene (ABS), SPCC, Tempered glass, Gaming

Description

DeepCool CL6600 WH. Form factor: Midi Tower, Type: PC, Product colour: White. Power supply location: Bottom, Supported power supply form factors: ATX, PS2, SFX, SFX-L. Front fans diameters supported: 140 mm, Rear fans diameters supported: 120,140 mm, Top fans diameters supported: 120,140 mm. Supported HDD sizes: 2.5,3.5". Width: 235 mm, Depth: 457.5 mm, Height: 533.5 mm

Specifications

Design
Pump connector	4-pin
Fan connector	4-pin
Bearing type	Fluid bearing
Form factor	Midi Tower
Type	PC
Material	Acrylonitrile butadiene styrene (ABS), SPCC, Tempered glass
Number of 5.25" bays	0
Number of 3.5" bays	3
Supported motherboard form factors	ATX, micro ATX, Mini-ITX
Product colour	White
Number of 2.5" bays	2
Number of internal 3.5" bays	2
Suitable for	Gaming
Side window	Yes
Reset button	Yes
Illumination location	Case fans
Illumination colour	Multi
Illumination	Yes
Cable management	Yes
Number of expansion slots	7
Maximum CPU cooler height	17.5 cm
Maximum graphics card length	41.3 cm
Maximum PSU length	16 cm
On/off button	Yes
Tempered glass panel(s)	Yes
Ergonomics
Reset button	Yes
Cable management	Yes
On/off button	Yes
Power supply
Supported power supply form factors	ATX, PS2, SFX, SFX-L
Power supply included	No
Power supply location	Bottom
Ports & interfaces
USB 3.2 Gen 2x2 Type-C ports quantity	0
USB 3.2 Gen 2 (3.1 Gen 2) Type-A ports quantity	0
USB 3.2 Gen 2 (3.1 Gen 2) Type-C ports quantity	1
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity	2
Pump connector	4-pin
Fan connector	4-pin
USB 2.0 ports quantity	0
Combo headphone/mic port	Yes
Cooling
Rear radiator sizes supported	120 mm
Top radiator sizes supported	120,240,280,360 mm
Pump power consumption	3.48 W
Pump load current	0.29 A
Maximum airflow	73.41 cfm
Fan rated voltage	12 V
Fan rated current	0.3 A
Fan power consumption	3.6 W
Number of front fans supported (max)	2
Front fans diameters supported	140 mm
Number of rear fans supported (max)	1
Rear fans diameters supported	120,140 mm
Number of top fans supported (max)	3
Top fans diameters supported	120,140 mm
Bottom fans installed	2x 120 mm
Number of bottom fans supported (max)	2
Bottom fans diameters supported	120 mm
Liquid cooling capability	Yes
Liquid cooling installed	Yes
Pump motor speed	2500 RPM
Storage
Supported HDD sizes	2.5,3.5"
Weight & dimensions
Width	235 mm
Depth	457.5 mm
Height	533.5 mm
Weight	11.8 kg
Radiator width	12 cm
Radiator depth	2.7 cm
Radiator height	40.2 cm
Pump width	11.8 cm
Pump depth	8 cm
Pump height	7.6 cm
Other features
Pump connector	4-pin
Maximum airflow	73.41 cfm
Fan connector	4-pin
Bearing type	Fluid bearing

DeepCool CG330 3F, Tower, PC, Black, ITX, micro ATX, Acrylonitrile butadiene styrene (ABS), SPCC, Tempered glass, 16.4 cm

Description

DeepCool CG330 3F. Form factor: Tower, Type: PC, Product colour: Black. Power supply location: Rear. Side fans installed: 2x 120 mm, Side fans diameters supported: 120,140 mm, Rear fans installed: 1x 120 mm. Supported HDD sizes: 2.5,3.5". Width: 285 mm, Depth: 420 mm, Height: 368 mm

Specifications

Ergonomics
Cable management	Yes
On/off button	Yes
Design
Anti-dust filter	Yes
Form factor	Tower
Type	PC
Material	Acrylonitrile butadiene styrene (ABS), SPCC, Tempered glass
Number of 5.25" bays	0
Number of 3.5" bays	2
Supported motherboard form factors	ITX, micro ATX
Product colour	Black
Number of 2.5" bays	4
Side window	Yes
Cable management	Yes
Number of expansion slots	5
Maximum CPU cooler height	16.4 cm
Maximum graphics card length	41 cm
Maximum PSU length	20 cm
On/off button	Yes
Tempered glass panel(s)	Yes
RGB control button	Yes
Power supply
Power supply included	No
Power supply location	Rear
Ports & interfaces
USB 3.2 Gen 2x2 Type-C ports quantity	0
USB 3.2 Gen 2 (3.1 Gen 2) Type-A ports quantity	0
USB 3.2 Gen 2 (3.1 Gen 2) Type-C ports quantity	0
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity	1
USB 2.0 ports quantity	2
Combo headphone/mic port	Yes
Cooling
Top radiator sizes supported	120,140,240,280,360 mm
Number of front fans supported (max)	0
Side fans installed	2x 120 mm
Number of side fans supported (max)	2
Side fans diameters supported	120,140 mm
Rear fans installed	1x 120 mm
Number of rear fans supported (max)	1
Rear fans diameters supported	120 mm
Number of top fans supported (max)	3
Top fans diameters supported	120,140 mm
Number of bottom fans supported (max)	3
Bottom fans diameters supported	120 mm
Bottom radiator sizes supported	120,240,360 mm
Side radiator sizes supported	120,140,240,280 mm
Storage
Supported HDD sizes	2.5,3.5"
Technical details
Compliance certificates	CE, UKCA
Packaging content
Screws included	Yes
Weight & dimensions
Width	285 mm
Depth	420 mm
Height	368 mm
Weight	5.5 kg
Other features
Screws included	Yes

Mini-ITX/Micro-ATX/ATX, ABS/SPCC/Tempered Glass, 2x USB 3.0, 1x USB-C Gen2, 1x Audio/Mic

Description

SPLIT FOR PERFECT FLOW
CL660 WH keeps things cooler with a modular split-chamber layout. It provides a dedicated zone for your radiator, creating separate airflow paths for heat-generating components and letting the whole system run at its best.

BALANCE IN LAYERS
A raised top chamber redefines the overall silhouette while keeping space organized. Vertical grille bars at the front provide natural ventilation and create visual rhythm, with real wood adding an organic finish to the clean, modern aesthetic.

BUILT-IN ATMOSPHERE
Pre-installed and smartly recessed, the dual FL12R SE fans at the bottom pull in fresh air and illuminate your build with a vivid glow—without taking up visual space.

WIDE COOLING FLEXIBILITY
Maximize your cooling potential with support for 360mm AIOs and up to eight 120mm fans in total. Three 120mm fans or two 140mm fans can be mounted above the radiator in push-pull configuration (fan–radiator–fan).

BUILD WITH CONFIDENCE
CL660 WH gives high-end builds plenty of room, fitting GPUs up to 388mm, tall air coolers to 175mm, and standard ATX PSUs up to 160mm. Back-connect motherboard support and 7 expansion slots make future upgrades simple.

Specifications

Ergonomics
Reset button	Yes
Cable management	Yes
On/off button	Yes
Design
Anti-dust filter	Yes
Type	PC
Material	Acrylonitrile butadiene styrene (ABS), SPCC, Tempered glass
Number of 5.25" bays	0
Number of 3.5" bays	2
Supported motherboard form factors	Mini-ITX, micro ATX, ATX
Product colour	Black
Number of 2.5" bays	1
Side window	Yes
Reset button	Yes
Illumination location	Case fans
Illumination colour	Multi
Illumination	Yes
Cable management	Yes
Number of expansion slots	7
Maximum CPU cooler height	17.5 cm
Maximum graphics card length	41.3 cm
Maximum PSU length	16 cm
On/off button	Yes
Tempered glass panel(s)	Yes
Power supply
Supported power supply form factors	ATX, PS2, SFX, SFX-L
Power supply included	No
Ports & interfaces
USB 3.2 Gen 2x2 Type-C ports quantity	0
USB 3.2 Gen 2 (3.1 Gen 2) Type-A ports quantity	0
USB 3.2 Gen 2 (3.1 Gen 2) Type-C ports quantity	1
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity	2
USB 2.0 ports quantity	0
Combo headphone/mic port	Yes
Cooling
Rear radiator sizes supported	120 mm
Top radiator sizes supported	120,240,360 mm
Number of front fans supported (max)	2
Front fans diameters supported	140 mm
Number of rear fans supported (max)	1
Rear fans diameters supported	120,140 mm
Number of top fans supported (max)	3
Top fans diameters supported	120,140 mm
Bottom fans installed	2x 120 mm
Number of bottom fans supported (max)	2
Bottom fans diameters supported	120 mm
Liquid cooling capability	Yes
Storage
Supported HDD sizes	3.5"
SSD form factor	2.5"
Packaging content
Manual	Yes
Weight & dimensions
Width	235 mm
Depth	457.5 mm
Height	533.5 mm
Weight	10 kg
Packaging data
Manual	Yes
Other features
Manual	Yes

DeepCool CG330 3F WH, Tower, PC, White, ITX, micro ATX, Acrylonitrile butadiene styrene (ABS), SPCC, Tempered glass, 16.4 cm

Description

DeepCool CG330 3F WH. Form factor: Tower, Type: PC, Product colour: White. Power supply location: Rear. Side fans installed: 2x 120 mm, Side fans diameters supported: 120,140 mm, Rear fans installed: 1x 120 mm. Supported HDD sizes: 2.5,3.5". Width: 285 mm, Depth: 420 mm, Height: 368 mm

Specifications

Ergonomics
Cable management	Yes
On/off button	Yes
Design
Anti-dust filter	Yes
Form factor	Tower
Type	PC
Material	Acrylonitrile butadiene styrene (ABS), SPCC, Tempered glass
Number of 5.25" bays	0
Number of 3.5" bays	2
Supported motherboard form factors	ITX, micro ATX
Product colour	White
Number of 2.5" bays	4
Side window	Yes
Cable management	Yes
Number of expansion slots	5
Maximum CPU cooler height	16.4 cm
Maximum graphics card length	41 cm
Maximum PSU length	20 cm
On/off button	Yes
Tempered glass panel(s)	Yes
RGB control button	Yes
Power supply
Power supply included	No
Power supply location	Rear
Ports & interfaces
USB 3.2 Gen 2x2 Type-C ports quantity	0
USB 3.2 Gen 2 (3.1 Gen 2) Type-A ports quantity	0
USB 3.2 Gen 2 (3.1 Gen 2) Type-C ports quantity	0
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity	1
USB 2.0 ports quantity	2
Combo headphone/mic port	Yes
Cooling
Top radiator sizes supported	120,140,240,280,360 mm
Number of front fans supported (max)	0
Side fans installed	2x 120 mm
Number of side fans supported (max)	2
Side fans diameters supported	120,140 mm
Rear fans installed	1x 120 mm
Number of rear fans supported (max)	1
Rear fans diameters supported	120 mm
Number of top fans supported (max)	3
Top fans diameters supported	120,140 mm
Number of bottom fans supported (max)	3
Bottom fans diameters supported	120 mm
Bottom radiator sizes supported	120,240,360 mm
Side radiator sizes supported	120,140,240,280 mm
Storage
Supported HDD sizes	2.5,3.5"
Technical details
Compliance certificates	CE, UKCA
Packaging content
Screws included	Yes
Weight & dimensions
Width	285 mm
Depth	420 mm
Height	368 mm
Weight	5.5 kg
Other features
Screws included	Yes

Midi-Tower, Mini-ITX/Micro-ATX/ATX/E-ATX, Steel/Tempered Glass/Plastic, USB 3.2 Gen 2 Type-C, 4x USB 3.2 Gen 1 Type-A, Audio in/out

Key Features

• Sleek, uniquely contoured steel chassis
• 3x LX120 RGB fans and iCUE LINK System Hub included
• Integrated Aurora RGB Light Strips for smoothly diffused lighting
• Compatible with reverse connector motherboards
• Removable mesh front and roof high airflow panels
• Fits up to 10x 120mm or 4x 140mm fans and multiple 360mm radiators
• RapidRoute Cable Management System

Description

TURN HEADS
STRIKING COUNTOURS
Boasting a sleek, uniquely curved chassis, vibrant iCUE LINK Aurora light strips, and iCUE LINK LX120 RGB fans, this case delivers bold, dynamic lighting that showcases its striking aesthetics.

GET READY FOR YOUR NEXT BUILD
NEXT-GEN GPUs ARE COMING
Check which of our components will work with the next-generation of GPUs out of the box.

BREATHING SPACE
HUGE COOLING POTENTIAL
The spacious interior accommodates up to 10x 120mm or 4x 140mm cooling fans, as well as multiple 60mm-thick radiators, including up to a 360mm in front or side and a 360mm push/pull in the roof.

FULLY FEATURED
Equipped with everything you need to build a powerhouse PC. 

REMOVABLE FRONT AND ROOF AIRFLOW PANELS 
Mesh panels are optimized for high airflow with a unique design that maximizes venting, easily removable for quick access.

TWO CONVENIENT TOOL-FREE HINGED SIDE PANELS
Enjoy easy access with one hinged tempered glass panel that shows off your system, and one hinged steel panel on the other side.

CORSAIR RAPIDROUTE CABLE MANAGEMENT SYSTEM 
Route your cables quickly and easily through a hidden channel, with a roomy 46mm of space behind the motherboard.

ATTENTION TO DETAIL
REVERSE MOTHERBOARD SUPPORT
Validated for use with ASUS BTF, MSI Project Zero, and Gigabyte Project Stealth motherboards featuring connections on the back of the board, so your view isn’t spoiled by cables.

A BREEZE TO BUILD IN
With a modern design approach to a mainstream PC format, the 5000T Series has the convenient features to take the hassle out of your build.

REUSABLE SCREW BOX 
Never lose an important screw again thanks to the included reusable screw box holding everything you need securely locked away.

DOUBLESHOT GROMMETS
Enjoy frustration-free cable installation with soft rubber inner grommets for easy cable passthrough and hard rubber outers that securely hold the grommet in place.

QUIKTURN FAN SCREWS
As robust and secure as traditional screws, CORSAIR QuikTurn™ fan screws make adding fans to your system a breeze, useful when you’re filling up a case this size.

WIDE COOLING FLEXIBILITY
Customize your cooling setup with room for up to 10x 120mm fans, plus versatile radiator mounting options including up to dual 360mm radiators.

The 5000T has more than enough space to accommodate and cool your most ambitious build.

MODERN FRONT PANEL I/O
Puts your connections within easy reach, including a USB 3.2 Gen 2 Type-C Port, 4x USB 3.2 Gen 1 Type-A ports, and a combination audio/microphone jack.

GET STARTED FAST WITH iCUE
See how easy it is to install your new CORSAIR components and set things up in iCUE software.

Specifications

Ergonomics
Reset button	Yes
Cable management	Yes
On/off button	Yes
Design
Anti-dust filter	Yes
Form factor	Midi Tower
Type	PC
Material	Plastic, Steel, Tempered glass
Number of 5.25" bays	0
Number of 3.5" bays	2
Supported motherboard form factors	ATX, EATX, micro ATX, Mini-ITX
Product colour	White
Number of 2.5" bays	3
Suitable for	Gaming
Side window	Yes
Reset button	Yes
Illumination location	Case fans
Illumination colour	Multi
Illumination	Yes
Cable management	Yes
Number of expansion slots	7
Maximum CPU cooler height	17 cm
Maximum graphics card length	45 cm
Maximum PSU length	25 cm
On/off button	Yes
Tempered glass panel(s)	Yes
Power supply
Supported power supply form factors	ATX
Power supply included	No
Ports & interfaces
USB 3.2 Gen 2x2 Type-C ports quantity	0
USB 3.2 Gen 2 (3.1 Gen 2) Type-A ports quantity	0
USB 3.2 Gen 2 (3.1 Gen 2) Type-C ports quantity	1
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity	4
USB 2.0 ports quantity	0
Combo headphone/mic port	Yes
Cooling
Front radiator sizes supported	240,280,360 mm
Rear radiator sizes supported	120 mm
Top radiator sizes supported	240,280,360 mm
Front fans installed	3x 120 mm
Number of front fans supported (max)	3
Front fans diameters supported	120,140 mm
Number of side fans supported (max)	3
Side fans diameters supported	120 mm
Number of rear fans supported (max)	1
Rear fans diameters supported	120 mm
Number of top fans supported (max)	3
Top fans diameters supported	120,140 mm
Liquid cooling capability	Yes
Side radiator sizes supported	240,360 mm
Storage
Supported HDD sizes	3.5"
SSD form factor	2.5"
Technical details
Warranty period	2 year(s)
Weight & dimensions
Width	255 mm
Depth	545 mm
Height	550 mm
Weight	14 kg
Packaging data
LED controller	Yes

Full Tower ATX Gaming Case, Reset, USB 3.0 x 2, Type-C 10Gbps x 1, Headphone/Mic Combo Jack, 464 x 303 x 476 mm, 10.48 kg, White

Key Features

• Provides ample width to perfectly support wider RTX40 series GPU
• Supports vertical GPU riser brackets after removal
• Features 8 reusable PCIe slot covers
• Stylish PSU bracket with rubber pad to prevent scratch
• Vast room to house power supplies up to 210mm in length
• Support side-interface power supplies

Description

Vertical Cooling
Can accommodate three 120mm/140mm or two 160mm fans
each on top and bottom for efficient GPU cooling.

Dual Chamber
Independent cooling for CPU/GPU on the left side & PSU/Drives on the right side.

Best Cooling Design
Support 3 x 360mm radiators on top, bottom, and side simultaneously for liquid cooling.

0.8mm + 1.0mm thick steel & Tool-Free design
The ultra robust 0.8mm & 1mm steel brings unwavering protection, and the tool-free quick-release panels on the front, top and sides make the assembly and cleaning of components simplified than ever.

Specifications

Ergonomics
Reset button	Yes
Cable management	Yes
On/off button	Yes
Design
Anti-dust filter	Yes
Form factor	Full Tower
Type	PC
Material	Glass, Plastic, Steel
Number of 5.25" bays	0
Number of 3.5" bays	2
Supported motherboard form factors	ATX, ITX, micro ATX
Product colour	White
Number of 2.5" bays	4
Suitable for	Gaming
Side window	Yes
Reset button	Yes
Cable management	Yes
Number of expansion slots	8
Maximum CPU cooler height	17.5 cm
Maximum graphics card length	44 cm
Maximum PSU length	21 cm
On/off button	Yes
Tempered glass panel(s)	Yes
Heat sink included	No
Power supply
Power supply location	Rear
Number of power supply units	1
Ports & interfaces
USB 3.2 Gen 2 (3.1 Gen 2) Type-C ports quantity	1
Audio input	Yes
Audio output	Yes
Combo headphone/mic port	Yes
USB Type-C ports quantity	1
Cooling
Rear radiator sizes supported	120 mm
Top radiator sizes supported	120,140,240,280,360 mm
Number of side fans supported (max)	3
Side fans diameters supported	120,140 mm
Number of rear fans supported (max)	1
Rear fans diameters supported	120,140 mm
Number of top fans supported (max)	3
Top fans diameters supported	120,140 mm
Number of bottom fans supported (max)	3
Bottom fans diameters supported	120,140 mm
Liquid cooling capability	Yes
Bottom radiator sizes supported	120,140,240,280,360 mm
Side radiator sizes supported	120,140,200,280,360 mm
Suitable location	Computer case
Storage
Supported HDD sizes	3.5"
SSD form factor	2.5"
Packaging content
Manual	Yes
Weight & dimensions
Width	303 mm
Depth	464 mm
Height	476 mm
Weight	10.5 kg
Packaging data
Manual	Yes
Other features
Manual	Yes