Collection: Products

Full Tower ATX Gaming Case, Reset, USB 3.0 x 2, Type-C 10Gbps x 1, Headphone/Mic Combo Jack, 464 x 303 x 476 mm, 10.48 kg, White

Key Features

• Provides ample width to perfectly support wider RTX40 series GPU
• Supports vertical GPU riser brackets after removal
• Features 8 reusable PCIe slot covers
• Stylish PSU bracket with rubber pad to prevent scratch
• Vast room to house power supplies up to 210mm in length
• Support side-interface power supplies

Description

Vertical Cooling
Can accommodate three 120mm/140mm or two 160mm fans
each on top and bottom for efficient GPU cooling.

Dual Chamber
Independent cooling for CPU/GPU on the left side & PSU/Drives on the right side.

Best Cooling Design
Support 3 x 360mm radiators on top, bottom, and side simultaneously for liquid cooling.

0.8mm + 1.0mm thick steel & Tool-Free design
The ultra robust 0.8mm & 1mm steel brings unwavering protection, and the tool-free quick-release panels on the front, top and sides make the assembly and cleaning of components simplified than ever.

Specifications

Ergonomics
Reset button	Yes
Cable management	Yes
On/off button	Yes
Design
Anti-dust filter	Yes
Form factor	Full Tower
Type	PC
Material	Glass, Plastic, Steel
Number of 5.25" bays	0
Number of 3.5" bays	2
Supported motherboard form factors	ATX, ITX, micro ATX
Product colour	White
Number of 2.5" bays	4
Suitable for	Gaming
Side window	Yes
Reset button	Yes
Cable management	Yes
Number of expansion slots	8
Maximum CPU cooler height	17.5 cm
Maximum graphics card length	44 cm
Maximum PSU length	21 cm
On/off button	Yes
Tempered glass panel(s)	Yes
Heat sink included	No
Power supply
Power supply location	Rear
Number of power supply units	1
Ports & interfaces
USB 3.2 Gen 2 (3.1 Gen 2) Type-C ports quantity	1
Audio input	Yes
Audio output	Yes
Combo headphone/mic port	Yes
USB Type-C ports quantity	1
Cooling
Rear radiator sizes supported	120 mm
Top radiator sizes supported	120,140,240,280,360 mm
Number of side fans supported (max)	3
Side fans diameters supported	120,140 mm
Number of rear fans supported (max)	1
Rear fans diameters supported	120,140 mm
Number of top fans supported (max)	3
Top fans diameters supported	120,140 mm
Number of bottom fans supported (max)	3
Bottom fans diameters supported	120,140 mm
Liquid cooling capability	Yes
Bottom radiator sizes supported	120,140,240,280,360 mm
Side radiator sizes supported	120,140,200,280,360 mm
Suitable location	Computer case
Storage
Supported HDD sizes	3.5"
SSD form factor	2.5"
Packaging content
Manual	Yes
Weight & dimensions
Width	303 mm
Depth	464 mm
Height	476 mm
Weight	10.5 kg
Packaging data
Manual	Yes
Other features
Manual	Yes

E-ATX (280mm), ATX, M-ATX, ITX, 2.5"x4, 3.5"x2, USB, Headphone/Mic Combo Jack, 464 x 303 x 476 mm, 10.39Kg

Description

Seamless edge on front & side panel with exotic Wood
Glass panels employ unique 45° beveling technique that breaks the barrier between glasses, providing an uninterrupted and ultra-transparent view. Right side of front is made of wood that could be seamlessly integrated into your interior design style.

Vertical Cooling
Can accommodate three 120mm/140mm or two 160mm fans each on top and bottom for efficient GPU cooling.

Bottom fan configuration
Comes with interchangeable fan brackets to cater to fans of different sizes.

Dual Chamber
Independent cooling for CPU/GPU on the left side & PSU/Drives on the right side.

Best Cooling Design
Support 360mm radiators on top, bottom, and side simultaneously for liquid cooling.

Cavernous space for extreme liquid cooling
Top, bottom and right side all support THICK 360mm radiators, providing ultra cooling capability and efficiency.

0.8mm + 1.0mm thick steel & Tool-Free design
The ultra robust 0.8mm & 1mm steel brings unwavering protection, and the tool-free quick-release panels on the front, top and sides make the assembly and cleaning of components simplified than ever.

Specifications

Ergonomics
Reset button	Yes
On/off button	Yes
Design
Form factor	Full Tower
Type	PC
Material	Glass, Plastic, Steel, Wood
Number of 3.5" bays	2
Supported motherboard form factors	ATX, EATX, ITX, micro ATX
Product colour	Black, Wood
Number of 2.5" bays	4
Side window	Yes
Reset button	Yes
Number of expansion slots	8
Maximum CPU cooler height	17.5 cm
Maximum graphics card length	44 cm
Maximum PSU length	21 cm
On/off button	Yes
Ports & interfaces
USB 3.2 Gen 2 (3.1 Gen 2) Type-C ports quantity	1
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity	2
Combo headphone/mic port	Yes
Cooling
Rear radiator sizes supported	120 mm
Top radiator sizes supported	120,140,240,280,360 mm
Number of side fans supported (max)	5
Side fans diameters supported	120,140 mm
Number of rear fans supported (max)	2
Rear fans diameters supported	120,140 mm
Number of top fans supported (max)	8
Top fans diameters supported	120,140,160 mm
Number of bottom fans supported (max)	8
Bottom fans diameters supported	120,140,160 mm
Bottom radiator sizes supported	120,140,240,280,360 mm
Side radiator sizes supported	120,140,240,280,360 mm
Storage
Supported HDD sizes	2.5,3.5"
Weight & dimensions
Width	303 mm
Depth	464 mm
Height	476 mm
Weight	10.4 kg
Packaging data
Package width	400 mm
Package depth	549 mm
Package height	553 mm
Package weight	13.3 kg

CX500m ARGB Mid-Tower Gaming Case

Description

Panoramic 270° View
Standing out with full-view design on the seamless steel-tempered glass, CX500M ARGB's left and front panel offer an unobstructed view of your build, creating a stunning showcase for your components.

Vertical Cooling with Massive Air Intake
Bottom-up vertical airflow via mesh on lower front, lower left, and right side accelerates the heat dissipation.

Tool-Free Panels
Front and side panel adopt fixing stud design, which makes assembly and disassembly easier and helps avoid possible glass breakage.

Pre-Installed 3 x 120mm ARGB fans
Use the major case fan to daisy-chain the other two fans for ARGB sync and create your personal style.

EVA PSU Cushion Pads
With EVA anti-vibration foams on the power supply mount position, your lovely PC hardware is well protected against any jar or resonance caused by PSU operation.

Specifications

Ergonomics
On/off button	Yes
Design
Anti-dust filter	Yes
Form factor	Mini Tower
Type	PC
Material	Glass, Steel
Number of 3.5" bays	2
Supported motherboard form factors	ITX, micro ATX
Product colour	Black
Number of 2.5" bays	1
Maximum CPU cooler height	16.5 cm
Maximum graphics card length	41.5 cm
Maximum PSU length	27 cm
On/off button	Yes
Tempered glass panel(s)	Yes
RGB control button	Yes
Power supply
Power supply included	No
Power supply shroud	Yes
Ports & interfaces
USB 3.2 Gen 2 (3.1 Gen 2) Type-C ports quantity	1
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity	3
Combo headphone/mic port	Yes
Cooling
Top radiator sizes supported	120,140,240,280,360 mm
Side fans installed	2x 120 mm
Number of side fans supported (max)	2
Side fans diameters supported	120 mm
Rear fans installed	1x 120 mm
Number of rear fans supported (max)	1
Rear fans diameters supported	120 mm
Number of top fans supported (max)	3
Top fans diameters supported	120,140 mm
Storage
Supported HDD sizes	2.5,3.5"
Weight & dimensions
Width	210 mm
Depth	436 mm
Height	446 mm
Weight	6.34 kg
Packaging data
Package weight	8.2 kg

CX700 ARGB - Mid Tower, Steel + Glass, ATX, Micro-ATX, ITX

Description

Panoramic 270° View
Standing out with full-view design on the seamless 4mm steel-tempered glass, CX700 RGB ELITE's left and front panel offer an unobstructed view of your build, creating a stunning showcase for your components.

Tool-Free Panels
Front and side panel adopt fixing stud design, which makes assembly and disassembly easier and helps avoid possible glass breakage.

Vertical Cooling with Massive Air Intake
Bottom-up vertical airflow via mesh on lower front, lower left, and right side accelerates the heat dissipation.

Display with RGB Fans
9 fan positions with 5 pre-installed reverse fans provide great airflow and aesthetic appeal.

Support
2 x Water Cooler
Support simultaneous installation of 360mm radiator on top and 240mm radiator on side.

When installing a 240mm radiator on the side, the length of the graphics card is limited to 270mm.

EVA PSU Cushion Pads
With EVA anti-vibration foams on the power supply mount position, your lovely PC hardware is well protected against any jar or resonance caused by PSU operation.

Full Reusable PCI Slot Covers
Reusable PCI slot covers fulfill an optimal build experience.

Up to 9 Fans Simultaneously
When installing a 240mm radiator on the side, the length of the graphics card is limited to 270mm.

More Space
Than You Think
Still plenty of room for heat dissipation between the thick RTX 40 graphics card and PSU shroud fans.

Ample Cable Management Space
23mm of cable management space enusres your PC build looks neat.

Specifications

Design
Form factor	Midi Tower
Type	PC
Material	Glass, Steel
Number of 3.5" bays	2
Supported motherboard form factors	ATX, ITX, micro ATX
Product colour	Black
Number of 2.5" bays	2
Number of expansion slots	7
Maximum CPU cooler height	16 cm
Maximum graphics card length	41 cm
Maximum PSU length	27 cm
Power supply
Power supply included	No
Ports & interfaces
USB 3.2 Gen 2 (3.1 Gen 2) Type-C ports quantity	1
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity	1
Combo headphone/mic port	Yes
Cooling
Side fans installed	2x 120 mm
Number of side fans supported (max)	2
Side fans diameters supported	120 mm
Rear fans installed	1x 120 mm
Number of rear fans supported (max)	1
Rear fans diameters supported	120 mm
Number of top fans supported (max)	3
Top fans diameters supported	120,140 mm
Storage
Supported HDD sizes	2.5,3.5"
Weight & dimensions
Width	210 mm
Depth	436 mm
Height	486 mm
Weight	6.9 kg
Packaging data
Package width	290 mm
Package depth	545 mm
Package height	515 mm
Package weight	8.6 kg

Mid-Tower, Steel + Plastic + Wood, 7 Expansion Slots, 2.5"/3.5", USB 3.0, USB Type-C, 3.5 mm, 4x 120 mm / 1x 140 mm, 484 x 239 x 502 mm, 8.8 Kg

Description

Flow Luxury
F-LUX Platform, abbreviation of Flow Luxury, features ultra case structure design for excellent airflow and 5 x 120 mm fans included, delivering enhanced GPU cooling performance.

Flux Airflow
Multi-directional vent design, featuring extensive air intakes at the bottom, power supply chamber and lower sides, along with top vents and large-area mesh at the front, creating a dedicated Antec Flux airflow channel.

Multi-Directional Vent Design

Pre-Installed Fans 5 x High-Performance PWM Fans

With built-in PWM fan control hub in sync with M/B

Flux Vertical Cooling
Air intake via the PSU chamber maximizes heat dissipation while enhancing the intake effect for the graphics card.

Flux Horizontal Cooling
Air intake via the front mesh provide smooth venting channel throughout the case.

Premium Wood
Front panel is crafted with a combination of metal mesh and wood (walnut) to create a high-quality texture with different materials, integrating seamlessly into your home design.

Optimized Chassis Design
Front is recessed, fostering better airflow and reducing wind noise.

Removable Top Cooling Bracket
Mount the fans/radiators on the cooling bracket first and install the cooling bracket back to the case.

Recommended Water Cooling
Supports simultaneous installation of Front 360mm radiator + Top 360mm radiator.

Extreme Water Cooling
Supports simultaneous installation of Front 420mm push-pull radiator + Top 280mm radiator.

Fan & Radiator Support

Support Vertical GPU Mount With Vertical Bracket
Fully-open PCI slot covers can be removed to install the graphics card vertically.

Support Back-Connect Motherboards
Plug in cables from behind to give front a cleaner look and a smoother airflow channel.

Tool-Free Panel Design

2 x Sound-Dampening Side Panels
Both side panels are designed with sound-dampening foam, offering exceptional sound insulation.

Cable Management

- AVelcro strap x 3
- BCable tie x 3

I/O Panel
Dust plugs included.

Bottom full-size pull-out dust filter
For easy cleaning and strong dust prevention.

Specifications

Ergonomics
Reset button	Yes
LED indicators	Yes
Cable management	Yes
On/off button	Yes
Design
Anti-dust filter	Yes
Form factor	Midi Tower
Type	PC
Material	Plastic, Steel, Wood
Number of 5.25" bays	0
Number of 3.5" bays	2
Supported motherboard form factors	ATX, EATX, ITX, micro ATX
Product colour	Black, Wood
Number of 2.5" bays	1
Number of internal 3.5" bays	2
Suitable for	Gaming
Side window	Yes
Reset button	Yes
LED indicators	Yes
Cable management	Yes
Number of expansion slots	7
Maximum CPU cooler height	18 cm
Maximum graphics card length	40.8 cm
Maximum PSU length	23.5 cm
On/off button	Yes
Power supply
Supported power supply form factors	ATX
Power supply included	No
Power supply location	Bottom
Ports & interfaces
USB 3.2 Gen 2x2 Type-C ports quantity	0
USB 3.2 Gen 2 (3.1 Gen 2) Type-A ports quantity	0
USB 3.2 Gen 2 (3.1 Gen 2) Type-C ports quantity	1
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity	2
USB 2.0 ports quantity	0
Combo headphone/mic port	Yes
Cooling
Front radiator sizes supported	120,140,240,280,360,420 mm
Rear radiator sizes supported	120,140 mm
Top radiator sizes supported	120,140,240,280,360 mm
Front fans installed	3x 120 mm
Number of front fans supported (max)	3
Front fans diameters supported	120,140 mm
Rear fans installed	1x 140 mm
Number of rear fans supported (max)	1
Rear fans diameters supported	120,140 mm
Number of top fans supported (max)	3
Top fans diameters supported	120,140 mm
Number of bottom fans supported (max)	2
Bottom fans diameters supported	120,140 mm
Pulse-width modulation (PWM) support	Yes
Storage
HDD/SSD combo cage	Yes
Supported HDD sizes	2.5,3.5"
Weight & dimensions
Width	239 mm
Depth	484 mm
Height	502 mm
Weight	8.8 kg
Packaging data
Package weight	10.3 kg

ISK 110 VESA, Mini-ITX, VESA mount, 4xUSB 2.0

Description

Going small shouldn't mean sacrificing form or function. The ISK110 VESA is crafted for small, efficient builds without compromises. Just 78 mm wide and mounted on a stable clip-on base or included VESA mount, it fits two 2.5" drive bays - perfect for internal SSDs. Perforated mesh construction and space for a low-profile CPU cooler provide an ample amount of quiet cooling capability. An incredibly small yet powerful 90 watt adapter completes the package, providing power with up to 92% efficiency. Ideal for corporate builds, kiosks and digital signage, the ISK110 VESA is a miniscule case solution with massive features.

Specifications

Design
Form factor	Desktop
Type	PC
Material	Metal
Number of 3.5" bays	0
Supported motherboard form factors	Mini-ITX
Product colour	Silver
Number of internal 3.5" bays	0
Built-in speaker(s)	No
Power supply
Power supply	90 W
Ports & interfaces
USB 2.0 ports quantity	4
Audio input	Yes
Audio output	Yes
Storage
Supported HDD sizes	2.5"
Weight & dimensions
Width	78.6 mm
Depth	212 mm
Height	222 mm
Weight	1.3 kg

Micro-ATX Mini Tower, Steel, Plastic, M-ATX/ITX, 1x USB3.0, 2x USB2.0 , MIC/HD-AUDIO

Key Features

• Motherboard support: Up to M-ATX
• 2.5" SSD: 1
• 3.5" HDD / 2.5" SSD (Convertible): 2/1
• Graphics Card Support: Up to 275 mm
• CPU Cooler Support: Up to 150 mm
• PSU Support: Up to 150 mm

Description

Creation of Value & Function The NX200M Micro-ATX Mini Tower gaming case effortlessly combines a bevy of in-demand features: USB 3.0 connectivity, ample storage drive bays, room for expansion, and includes one 120mm fan in the rear. With support for up to a 240 mm liquid cooling radiator in front, NX200M is easy to build with and easy to cool. Large Mesh Front Panel Design The large mesh design in front panel delivers ample airflow to your gaming components and provides good heat dissipation.

Specifications

Ergonomics
Reset button	Yes
On/off button	Yes
Design
Anti-dust filter	Yes
Form factor	Mini Tower
Type	PC
Material	Plastic, Steel
Number of 3.5" bays	2
Supported motherboard form factors	ITX, micro ATX
Product colour	Black
Number of 2.5" bays	2
Suitable for	Gaming
Side window	Yes
Reset button	Yes
Number of expansion slots	4
Maximum CPU cooler height	15 cm
Maximum graphics card length	27.5 cm
Maximum PSU length	15 cm
On/off button	Yes
Power supply
Power supply included	No
Ports & interfaces
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity	1
USB 2.0 ports quantity	2
Audio input	Yes
Audio output	Yes
Cooling
Front radiator fan sizes supported	120,140,240 mm
Rear radiator fan sizes supported	120 mm
Number of front fans supported (max)	2
Front fans diameters supported	120,140 mm
Rear fans installed	1x 120 mm
Number of rear fans supported (max)	1
Rear fans diameters supported	120 mm
Number of top fans supported (max)	2
Top fans diameters supported	120 mm
Storage
Supported HDD sizes	2.5,3.5"
Technical details
Harmonized System (HS) code	84733080
Weight & dimensions
Width	200 mm
Depth	351 mm
Height	390 mm
Weight	3.51 kg
Packaging data
Package weight	4.34 kg
Other features
Harmonized System (HS) code	84733080

Mid Tower, E-ATX, ATX, Micro-ATX, ITX, USB Type-C 3.2 Gen 2, 469 x 220 x 490 mm, Steel, White

Description

MASSIVE METAL MESH FRONT PANEL Simple Assembly & Superior Cooling Antec Performance Series P20C White adopts a unique metal design, providing a massive airflow path. With the full-size dust filter, the P20C White can reach the balance between cooling and dust prevention. The pin-type metal front panel is effortlessly removable, and the clip-on dust filter makes cleaning easy. The well-designed styling will give you a remarkable PC showcase. PRE-INSTALLED FANS 3 x 120mm PWM Fans Included - Pre-installed fans at the front provide massive airflow, and the PWM function can easily reach the balance between cooling and silence. - The included 1 to 4 fan splitter cable makes cable management easy. HIGH-SPEED TRANSFER Type-C 3.2 Gen 2 Ready Built-in Type-C 3.2 Gen 2 port provides transfer speeds up to 10 Gbps. - Power - Reset - HD-AUDIO - MIC - USB 3.0 *2 UNLIMITED CONFIGURATION OPTIONS High flexibility for Expansion Features an extensive interior and powerful compatibility. Supports 2 x 360mm radiators at the front and the top simultaneously. PC-DIY SHOWCASE Supports Vertical GPU Installation Ready to provide users with a more flexible layout through the 7 reusable PCI-E slots for vertical GPU installation. REMARKABLE COMPATIBILITY Dual CPU Motherboard Support Supports dual CPU motherboards with a width of up to 330mm, reflecting the upgrade and evolution of compatibility. CABLE MANAGEMENT Building a Clean PC Is Within Easy Reach Well-designed cable routing makes wiring easy and simple. The cable channels with a cutout on top for stable routing. COOLING COMPATIBILITY 9 Fans Simultaneously 3 x 120mm fans and a 360mm radiator can be installed inside the interior at the front. Plus 3 x 120mm fans outside the interior for outstanding cooling. Supports up to 9 x 120mm fans & 360mm radiators at the front and top simultaneously. STORAGE COMPATIBILITY Easy Installation Fits up to 4 drive devices. 2 HDD & SSD compatible hard drive bays; 2 SSD hard drive bays. - Snap-in 2.5" drive device for easy mounting. - Removable hard drive cage. - Tool-free 3.5" drive tray.

Specifications

Ergonomics
Reset button	Yes
Cable management	Yes
On/off button	Yes
Design
Anti-dust filter	Yes
Form factor	Midi Tower
Type	PC
Material	Plastic, Steel
Number of 3.5" bays	2
Supported motherboard form factors	ATX, EATX, ITX, micro ATX
Product colour	White
Number of 2.5" bays	2
Suitable for	Gaming
Side window	Yes
Reset button	Yes
Cable management	Yes
Number of expansion slots	7
Maximum CPU cooler height	17 cm
Maximum graphics card length	37.5 cm
Maximum PSU length	41 cm
On/off button	Yes
Tempered glass panel(s)	Yes
Power supply
Power supply included	No
Ports & interfaces
USB 3.2 Gen 2 (3.1 Gen 2) Type-C ports quantity	1
Audio input	Yes
Audio output	Yes
Cooling
Front radiator sizes supported	120,140,240,280,360 mm
Rear radiator sizes supported	120 mm
Top radiator sizes supported	120,140,240,280,360 mm
Front fans installed	3x 120 mm
Number of front fans supported (max)	3
Front fans diameters supported	120,140,185 mm
Number of rear fans supported (max)	1
Rear fans diameters supported	120 mm
Number of top fans supported (max)	3
Top fans diameters supported	120,140 mm
Storage
Supported HDD sizes	2.5,3.5"
Weight & dimensions
Width	220 mm
Depth	469 mm
Height	490 mm
Weight	8.1 kg
Packaging data
Package weight	9.32 kg