Collection: Products

StarTech IDE to SATA Hard Drive or Optical Drive Adapter Converter, 40-Pin PATA to 2.5" SATA HDD / SSD / ODD Converter, TAA

Key Features

• CONVENIENT SETUP: This IDE to SATA adapter enables SATA connectivity on older IDE motherboards, and is a complete hardware solution that does not require additional drivers or software; Works with any Operating System
• ADD SATA CONNECTIVITY: This IDE SATA converter is a cost-effective solution for connecting SATA hard drives or optical drives to legacy IDE systems, with no additional controller cards required; Includes LP4 to SP4 internal power cable
• WIDE COMPATIBILITY: Supports 2.5/3.5/5.25in SATA drives; Features features ODD (Optical Disk Drive) support for Blu-ray, DVD, or CD-ROM drives; Compliant with SATA version 1.0 and supports SATA I/II/III; Compatible with IDE/ATA 33/66/100/133
• THE IT PRO'S CHOICE: Designed and built for IT Professionals, this IDE to SATA motherboard adapter is backed for 2 years, including free lifetime 24/5 multi-lingual assistance

Description

Connect your SATA Hard Drive or Blu-ray/DVD/CD-ROM Drive to an IDE motherboard

The IDE2SAT2 40-pin IDE to SATA adapter enables you to connect a SATA I/II/III drive to an available IDE/ATA 33/66/100/133 motherboard port - a cost effective solution that allows you to add newer SATA drives, and keep your existing motherboard.

The IDE/SATA adapter offers a cost-effective solution for bridging the gap between a newer 2.5"/3.5"/5.25" SATA drive and older IDE motherboard port. The IDE2SAT2 also features ODD (Optical Disk Drive) support, allowing you to a add Blu-ray, DVD, or CD-ROM drives to an older IDE motherboard.

The IDE/SATA adapter is backed by a StarTech.com 2-year Warranty and free lifetime technical support.

Specifications

Ports & interfaces
Internal	Yes
Host interface	IDE
Output interface	SATA
Connector(s)	1 x IDE (40 Pin; EIDE/PATA), 1 x SATA (7+15 pin), 1 x SP4 (4 pin)
Performance
Chipset	Marvell - 88SA8052
Logical block addressing (LBA) support	48 bit
Data transfer rate (max)	0.133 Gbit/s
Product colour	Red
Harmonized System (HS) code	84733020
Design
Internal	Yes
Product colour	Red
Certification	FCC, CE, TAA, REACH
Features
Chipset	Marvell - 88SA8052
Logical block addressing (LBA) support	48 bit
Data transfer rate (max)	0.133 Gbit/s
Harmonized System (HS) code	84733020
Operational conditions
Operating temperature (T-T)	5 - 50 °C
Storage temperature (T-T)	-25 - 80 °C
Operating relative humidity (H-H)	15 - 90%
Technical details
Material	Plastic, Steel
Harmonized System (HS) code	84733020
Compliance certificates	RoHS
Weight & dimensions
Width	20 mm
Depth	75.5 mm
Height	23 mm
Weight	29 g
Package width	142 mm
Package depth	174 mm
Package height	34 mm
Package weight	89 g
Packaging data
Manual	Yes
Package width	142 mm
Package depth	174 mm
Package height	34 mm
Package weight	89 g
Logistics data
Products per master (outer) case	60 pc(s)
Master (outer) case width	512 mm
Master (outer) case length	396 mm
Master (outer) case height	326 mm
Harmonized System (HS) code	84733020
Other features
Material	Plastic, Steel
Chipset	Marvell - 88SA8052
Packaging content
Manual	Yes

StarTech Laptop Desk Mount, VESA Monitor Mount for Displays up to 34" 17.6lb/8kg) or Laptops up to 9.9lb (4.5kg), Articulating Arm Tray with Clamp or Grommet Base

Key Features

• LAPTOP MOUNT FOR DESK: The black dual-purpose mount allows you to mount a laptop using the VESA laptop tray or use it to mount a 27" or a 34" ultrawide display with basic articulation & height adjustment. Capacity 8kg/17.6lb monitor or 4.5kg/9.9lb laptop
• SECURE LAPTOP TRAY: Adjustable padded arms grip and hold laptop (9.4-16.5" wide) at different angles; Arms can be positioned to avoid blocking laptop ports; Stoppers at the bottom w/variable heights 0.5" or 0.9" prevent laptop from sliding off; Ventilated
• RANGE OF MOTION: The laptop tray or mounted display (75x75 & 100x100mm) have a wide range of motion with +/- 45° tilt, +/- 90° swivel, and 360° rotation (portrait/landscape). The laptop tray features ledge stoppers and padded arms to secure the laptop
• ARTICULATING LAPTOP ARM: The arm height on the desk monitor mount can be positioned and secured anywhere along the 17.7 inches / 449mm pole and extend up to 16.85 inches / 428mm from the base. The arm has two joints allowing for +/-180° articulation
• INSTALLATION OPTIONS: Interchangeable desk-clamp (C clamp) and grommet mount can be secured and tightened by hand to a desk 0.39 - 3.46 inches (10 - 88 mm) thick. Tools included to adjust articulation, tension, and height. Cable management clips included

Description

Laptop Desk Mount | Displays up to 34in (8kg/17.6lb) & Laptops (4.5kg/9.9lb) | Vented

Increase your desk space and add versatility and ergonomics to your work/home setup with this laptop desk mount. The tray (11.8 x 11 in / 300 x 280 mm) is large enough to hold a laptop between 9.4 - 16.5 inches (240 - 420 mm) wide, 1 inch (25.4 mm) thick, and of up to 10 lbs (4.5 kg).

Ergonomic and adaptable

The arm offers a high number of adjustments such as tilt +45/-45° tilt, swivel +90/-90°; rotation 360°; and height adjustment along the (17.7 in / 449 mm) pole. The arms can extend a maximum of 16.85 inches / 423 mm from the pole. The mechanical height adjustment provides a sturdy laptop tray to reduce bounce when typing. The multiple adjustment options allow the laptop to be positioned at eye level improving posture, comfort, and to be aligned with any existing monitors improving productivity.

Ventilated Laptop Tray

The laptop tray is well ventilated and includes optional rubber pads to prevent scuffs and scratches. In addition, the laptop tray features two independent adjustable padded arms that serve as a cradle to secure the laptop and can be independently positioned and secured along the sides of the tray to prevent blocking any port configuration on a laptop.

Mounting options

Using the interchangeable desk clamp (c-clamp) you can easily attach and secure the mount to a desk or grommet hole (0.39in - 3.46in / 10mm - 88mm thick) by hand. You can optionally remove the laptop tray and use the arm to mount a VESA compatible 75x75mm or 100x100mm 27" display or 34" (21:9) ultrawide display with a maximum weight of 17.6 lbs (8 kg).

A-LAPTOP-DESK-MOUNT is backed for 5-years by StarTech.com, including free lifetime 24/5 multi-lingual technical assistance.

Specifications

Design
Product type	Laptop arm
Minimum notebook screen size compatibility	33 cm (13")
Maximum notebook screen size compatibility	86.4 cm (34")
Product colour	Black
Material	Plastic, Steel
Maximum weight capacity	8 kg
Wall mountable	No
Number of devices supported	1
Ergonomics
Panel mounting interface	75 x 75,100 x 100 mm
VESA mounting	Yes
Cable management	Yes
Rotating	Yes
Adjustable	Yes
Height adjustment	Yes
Swivel angle range	-90 - 90°
Tilt angle range	-45 - 45°
Angle of rotation	360°
Maximum height	45 cm
Maximum arm extension	42.8 cm
Desk thickness (max)	8.8 cm
Weight & dimensions
Desk thickness (max)	8.8 cm
Width	708 mm
Depth	420 mm
Height	550 mm
Weight	4.3 kg
Package width	303 mm
Package depth	470 mm
Package height	173 mm
Package weight	5.2 kg
Packaging data
Package width	303 mm
Package depth	470 mm
Package height	173 mm
Package weight	5.2 kg
Packaging content
Grommet base plate included	Yes
Grommet clamp plate included	Yes
Number of screws included	13 pc(s)
Number of washers included	4
Wrench type	Hexagonal wrench
Technical details
Mounting type	Desk
Logistics data
Master (outer) case width	471 mm
Master (outer) case length	310 mm
Master (outer) case height	184 mm
Products per master (outer) case	1 pc(s)

StarTech Laptop Stand - 2-in-1 Laptop Riser Stand or Vertical Stand - Ideal for Ultrabooks & MacBook Pro/Air - Ergonomic Angled Notebook Holder for Office Desk - Silver, Aluminum (LTSTND2IN1)

Key Features

• LAPTOP RISER STAND: This sleek silver aluminum laptop stand has a surface ideal for laptops up to 15"; Tilted/raised design at an ideal angle (17°) to help with ergonomic posture & increased comfort
• SAVE SPACE: Store the laptop vertically/upright when shut to maximize space, leaving all ports accessible for use with docking stations; Extra stability with an included wedge and 8.1"x2.9" (206mmx73mm) base
• VERSATILE: Laptop stand/holder with 2 interchangeable silicone cradle sizes (14mm & 16mm) to vertically support ultra-thin laptops like MacBook Air (11"/13"), MacBook Pro (11"/13"/15"), Ultrabook
• AESTHETIC DESIGN: Provides an elegant look to match your MacBook; Includes non-skid silicone pads positioned throughout to prevent sliding and to protect office desk/tabletop surface & laptops from scratches/scuffs
• STARTECH.COM ADVANTAGE: This angled/elevated notebook computer stand is backed for 5-years by StarTech.com, including free 24/5 North America based multi-lingual tech support

Description

Laptop Riser Stand | Tilted and Vertical Mount Options | For Ultra-thin Laptops 11" to 15"

This 2 in 1 Aluminum Laptop Stand enables you to mount your laptop in two different positions depending on your application. Its aesthetic design provides function while maintaining an elegant silver look that matches your MacBook or other ultra-thin laptops. The 2 interchangeable silicone holders allow this stand to support laptops from 11" to 15" (14mm to 16mm in thickness) in an upright position, while protecting them from scratches and scuffing.

Ergonomic design

This Laptop Stand provides you with two options for mounting your laptop to suit your desktop setup. Use it as a laptop tilted stand, giving you an ergonomic tilted position for your laptop (17°); or as a vertical laptop stand, to save space and keep your workstation organized. With the included bracket, this stand provides increased stability and weight distribution to your vertically mounted laptop.

Increased Airflow

With its open frame, this Laptop Riser Stand offers increased airflow allowing your devices to stay cooler than if they were laying flat on your desk.

Port Accessibility

The Aluminum Laptop stand has been designed with an open frame design, so you can have all the ports on your laptop easily accessed to use with docking stations, and other peripherals in both mounting options.

The LTSTND2N1 is backed by a StarTech.com 5-year warranty and free lifetime technical support.

Specifications

Design
Minimum notebook screen size compatibility	27.9 cm (11")
Maximum notebook screen size compatibility	38.1 cm (15")
Product colour	Silver
Material	Aluminium
Number of devices supported	1
Ergonomics
Height adjustment	No
Tilt angle range	0 - 17°
Weight & dimensions
Width	167 mm
Depth	233 mm
Height	73 mm
Weight	540 g
Package width	224 mm
Package depth	239 mm
Package height	82 mm
Package weight	540 g
Packaging data
Package width	224 mm
Package depth	239 mm
Package height	82 mm
Package weight	540 g
Packaging content
Quick start guide	Yes
Technical details
Compliance certificates	CE, RoHS
Logistics data
Master (outer) case width	507 mm
Master (outer) case length	435 mm
Master (outer) case height	482 mm
Products per master (outer) case	20 pc(s)
Harmonized System (HS) code	84733080

StarTech Laptop Stand for Desk, Ergonomic Laptop Stand Adjustable Height, Aluminum, Portable, Max. 22lb (10kg), Foldable Laptop Holder - Angled Notebook Computer Riser/Lift (ADJ-LAPTOP-RISER)

Key Features

• LAPTOP RISER STAND: This silver laptop holder for desk lifts and tilts your laptop to eye level for ergonomic comfort and increased productivity - Features 10.6 x 8.9in (26.9 x 22.6cm) height-adjustable surface that supports any laptop up to 22lb (10kg)
• STABLE & ADJUSTABLE: Anti-slip pads and front flanges on riser arms provide stable support and secure the laptop at steep angles - Adjust tilt and height up to 4.7in (12cm) from the desk surface - Tension can be controlled with included tool
• AIRFLOW VENTILATION: Vented all-aluminum construction improves airflow underneath your laptop/ultrabook/chromebook - Increased heat dissipation reduces fan noise and heat stress on laptop hardware, and improves laptop performance and longevity
• COMPACT DESIGN: The solid base measures only 7.8 x 8.4in (19.9 x 21.4cm) and features anti-slip pads to keep the space saving laptop stand in place and to protect the desk - Foldable, ligthweight (1.5lb/714g) holder can be carried around in a laptop bag
• THE IT PRO'S CHOICE: Designed and built for IT Professionals, this portable universal laptop riser comes fully assembled and is backed for two years, including free lifetime 24/5 multi-lingual technical assistance

Description

Variable Height and Tilt | Vented | Ligthweight (1.5lb/714g)

Adjust the height and tilt of a laptop to eye level for ergonomic comfort and increased productivity. The laptop riser stand supports any laptop with a maximum weight capacity of 22lb (10kg). The lightweight and foldable design enables quick transportation and convenient storage. When collapsed, the riser measures 10.6x8.8x1.9in (27x22.5x5cm).

Tilt for Ideal Viewing

This ergonomic laptop stand features tilt and height adjustments (up to 4.7in/12cm) to establish the most comfortable viewing angle. Adjust the tension of the support arms, using the included tool, for various weight, tilt, and height settings. The raised flanges (0.7in /18mm), located at the front of the laptop platform, ensure the laptop remains in place when the platform is tilted. Rubber pads around the surface help protect the laptop from cosmetic damage.

Stable Laptop Stand

The laptop riser features a silver anodized finish with aluminum construction to ensure durability and sturdiness. The vented surface area is elevated to promote passive cooling and airflow. The space underneath the laptop platform can be used to store a keyboard, mouse, and/or other accessories and peripherals when they are not in use.

The non-skid rubber feet aid in protecting the surface of the desk from scratches and scuffs, including glass top desks. The laptop riser for desks ships fully assembled for immediate use.

This product is backed for five years, including free lifetime 24/5 multi-lingual technical assistance.

Specifications

Design
Product type	Laptop stand
Product colour	Silver
Material	Aluminium
Maximum weight capacity	10 kg
Number of devices supported	1
Ergonomics
Foldable	Yes
Adjustable	Yes
Height adjustment	Yes
Height adjustment range	33.2 - 120 mm
Weight & dimensions
Width	226 mm
Depth	269 mm
Height	50 mm
Weight	700 g
Package width	290 mm
Package depth	244 mm
Package height	60 mm
Package weight	900 g
Packaging data
Package width	290 mm
Package depth	244 mm
Package height	60 mm
Package weight	900 g
Logistics data
Master (outer) case width	612 mm
Master (outer) case length	313 mm
Master (outer) case height	515 mm
Products per master (outer) case	20 pc(s)

StarTech Laptop Stand for Desk, Supports 5kg/11lb, Aluminum, Silver, Ergonomic Laptop Riser, Portable Laptop Holder, Computer Stand for Macbook Air/Pro, Dell XPS, Lenovo (LAPTOP-STAND-SILVER)

Key Features

• LAPTOP STAND: This aluminum laptop riser is built with 2 angled (16°) supporting arms that have a flat surface with a lip acting as a stopper. The arms are lined with rubber pads to protect the laptop from scuffs and scratches
• EASY ASSEMBLY BY HAND: The laptop computer stand is quickly assembled by hand connecting the 3 pieces (tool-less). This lightweight design, weighing only 2.13lbs (970g) is very sturdy and allows the desk laptop holder to support up to 11lbs (5kg)
• EFFICIENT USE OF SPACE: The angled arms sit at 4.17in (106mm) and 5.67in (144mm) high and are spaced 6.3in (160mm) apart, providing airflow and enough room to store keyboard and mouse. Openings at the back of the notebook stand help with cable management
• HIGH QUALITY: The laptop stand for desk has an anodized silver finish and grey anti-slip pads that complement MacBooks amongst other laptops. All the pieces of the laptop platform are 0.19in (5mm) thick. Support arms dimensions 8.26x1.96in (210mmx50mm)
• ANTI-SLIP PROTECTION & STABILITY: Pads at the bottom protect the surfaces on which the ergonomic laptop stand sits (including glass top desks) and are non-skid providing additional stability. Overall dimensions 10.2x8.7x5.6in (260x223x144mm)

Description

Stand for Laptop | For Most Laptops Including 13"; 15.6"; and 17" | Angled 16°

Raise your laptop on your desk for more comfortable viewing while saving desktop space and increasing your comfort and productivity. The laptop riser supports most laptops including 13"; 15.6"; and 17" with a maximum weight of 11 lbs (5 kg). The lightweight design (2.13 lbs / 970 g) allows you to reorganize your workspace with ease. Overall dimensions 10.2x8.7x5.6 in (260x223x144 mm).

Stable Laptop Stand

The elegant laptop riser features a silver anodized finish with 0.19in (5mm) thick aluminum parts to ensure its durability. The two support arms create an effective surface area of 8.26x10.23 in (210x260 mm) and provide generous room underneath for passive cooling and airflow, and can be used to store a keyboard, mouse, or other accessories and peripherals when they are not in use.

Simple Assembly

The laptop stand for desks is easily put together with only 3 components that can be assembled by hand. Cable management openings at the back of the support arms help to keep your cables tidy and organized. The non-skid rubber feet protect your work surface from scratches and scuffs.

Tilted for Ideal Viewing

The ergonomic laptop stand is tilted slightly downward at 16 degrees providing a comfortable viewing angle. The raised lip on the front of the support arms with the help of the rubber pads on the surface prevents the laptop from sliding off.

LAPTOP-STAND SILVER is backed for 5-years by StarTech.com, including free lifetime 24/5 multi-lingual technical assistance.

Specifications

Design
Product type	Laptop stand
Maximum notebook screen size compatibility	43.2 cm (17")
Product colour	Silver
Material	Aluminium
Maximum weight capacity	5 kg
Non-slip surface	Yes
Number of devices supported	1
Weight & dimensions
Width	223 mm
Depth	260 mm
Height	144 mm
Weight	1 kg
Package width	325 mm
Package depth	203 mm
Package height	62 mm
Package weight	1 kg
Packaging data
Package width	325 mm
Package depth	203 mm
Package height	62 mm
Package weight	1 kg
Packaging content
Quick start guide	Yes
Logistics data
Master (outer) case width	428 mm
Master (outer) case length	344 mm
Master (outer) case height	327 mm
Products per master (outer) case	10 pc(s)
Harmonized System (HS) code	84733080

StarTech Lenovo X13 Yoga Gen 4 Bright Privacy Screen Filter with Touch, Flip-Over, 75% Light Transmittance, Anti-Glare

Key Features

• Protect Sensitive Visual Data: This bright privacy screen filter uses Microlouver technology to narrow the viewing angle to +- 30 degrees, shielding Lenovo X13 Yoga Gen 4 displays from visual eavesdropping without blocking webcams, sensors or lid closure
• High Clarity with Blue Light Filtering: Offers up to 75% light transmittance for a brighter display than standard filters, minimizing the need for frequent removal; Independently tested by 3rd party lab to block 47% of blue light in the 380-450 nm range
• Flip-Over with Touch: Quickly flip the privacy filter to the back of the screen to adapt to different environments or share content without uninstalling; Ultra-thin profile preserves touchscreen responsiveness for uninterrupted workflows
• Hassle-Free Application: Install the privacy screen protector using the included adhesive strips or flip-over tabs, designed for use with bezel-less or slim bezel displays
• The IT Pro's Choice: Our high-quality privacy screens are trusted across industries and designed to fit nearly every device type, screen size, aspect ratio, and mounting style; Backed by free lifetime 24x5 multi-lingual technical assistance

Description

Safeguard on-screen information - 10% brighter than standard privacy filters

This Privacy Filter is designed for Lenovo X13 Yoga Gen 4 laptop screens.

Prevent visual eavesdropping

This privacy filter is a convenient and cost-effective solution to protect confidential data from unwanted viewers. The privacy shield darkens your computer's screen from the side while providing a clear viewing angle of 60 degrees (+/- 30 degrees from center) to the user.

Apply and Forget

Reduce eye strain and improve visual comfort by reducing blue light exposure. The 13.3-inch laptop screen filter is independently tested by a 3rd party lab to block 47% of blue light in the 380-450 nm range. Digital eye strain can lead to symptoms like headaches, dry eyes, and blurred vision.

Flip-Over and Touch

The feature enables you to quickly flip-over the privacy filter to share contents without uninstalling the filter. Your computer touch responsiveness is preserved by the ultrathin yet robust security shield, enabling seamless use. The privacy shield has a light transmittance of up to 75% providing optimal screen brightness and enhanced levels of privacy.

Hassle-free Installation

Install the privacy screen protector using the included adhesive strips or flip-over tabs. This unit is designed for use with bezel-less or slim bezel displays.

Specifications

Design
Maximum screen size	33.8 cm (13.3")
Type	Frameless display privacy filter
Suitable for	Laptop
Filter colour	Black
Product colour	Transparent
Features
Installation type	Flip attach + Attachment strip
Display filter features	Anti-glare, Privacy
Display types supported	LCD
Aspect ratio	16:10
Compatibility	X13 Yoga Gen 4
Light transmission	75%
Cleaning cloth	Yes
Limits viewing angle	30°
Reduces blue light up to	47%
Blue light filter	Yes
Brand compatibility	Lenovo
Ergonomics
Maximum screen size	33.8 cm (13.3")
Compatibility	X13 Yoga Gen 4
Weight & dimensions
Depth	0.5 mm
Width	285.6 mm
Height	178.2 mm
Weight	100 g
Package width	390 mm
Package depth	230 mm
Package height	2 mm
Package weight	151.1 g
Packaging data
Package width	390 mm
Package depth	230 mm
Package height	2 mm
Package weight	151.1 g
Packaging content
Quick start guide	Yes
Logistics data
Master (outer) case width	410 mm
Master (outer) case length	250 mm
Master (outer) case height	170 mm
Products per master (outer) case	25 pc(s)

StarTech M.2 SATA SSD to 2.5" SATA Adapter [NOT NVMe], Open-Frame Bracket, 7mm High, M2 Hard Drive Adapter - TAA

Key Features

• BOOST SYSTEM PERFORMANCE: Increase system performance by adding the speed of an M2 SSD in any 2.5" SATA application with the M2 SSD to 2.5in SATA Adapter; Open design maximizes heat dissipation to protect the health of your drive
• BROAD COMPATIBILITY: The M2 to SATA converter supports full length M2 SDD solid state drives and is compatible with other sizes including: 2230, 2242, 2260, and 2280; NOTE: Not compatible with M.2 NVMe or AHCI PCI-Express SSDs
• INCREASED TRANSFER SPEEDS: Utilize the full potential of your SATA III controller with an M2 SSD, reducing your data transfer bottleneck with file transfer speeds up to 6Gbps; Operating Temperature: -40°F to 185°F; Supports B Key/M+B Key M2 SATA SSDs
• HASSLE-FREE SETUP: This M2 hard drive adapter offers fast and easy setup with no drivers to install; Mounting hardware included with M2 SSD to SATA adapter; Supports 7mm or larger 2.5in SATA bays
• THE IT PRO'S CHOICE: IT professionals choice for over 30 years, this TAA compliant 2.5in M.2 SATA adapter is backed for 2 years, including free 24/5 North America based multi-lingual assistance

Description

M.2 SATA NGFF to 2.5 in. SATA | 7mm High | SATA 6Gbps | Open Frame

Vastly increase the performance of your system by adding the speed of an M.2 SATA SSD in any 2.5" SATA application, with this M.2 SATA SSD to 2.5in SATA adapter.

Boost System Performance

Utilize the full potential of your SATA III controller, with an M.2 SATA SSD, reducing your data transfer bottleneck with file transfer speeds up to 6Gbps. This M.2 SATA NGFF to SATA adapter can also save you money by reducing your power consumption over regular platter drives.

Hassle-Free Setup

This M.2 SATA to 2.5 in. SATA adapter offers a fast an easy setup with no drivers to install. The mounting hardware is also included with the M.2 SATA SSD to SATA adapter for a quick installation.

Open-Frame Design

The M.2 SATA SSD to 2.5 in. SATA converter helps protect the health of your drive with an open-frame design that maximizes heat dissipation.

SAT32M225 is backed by a StarTech.com 2-year warranty, and lifetime technical support.

Specifications

Ports & interfaces
Internal	Yes
Host interface	SATA
Output interface	M.2
SATA revision	3.0
Performance
Hot-swap	No
Data transfer rate (max)	6 Gbit/s
Product colour	Green
Harmonized System (HS) code	84733020
Design
Hot-swap	No
Internal	Yes
Product colour	Green
Certification	CE, FCC
Features
Data transfer rate (max)	6 Gbit/s
Harmonized System (HS) code	84733020
Operational conditions
Operating temperature (T-T)	-40 - 85 °C
Technical details
Harmonized System (HS) code	84733020
Compliance certificates	RoHS
System requirements
Windows operating systems supported	Yes
Mac operating systems supported	Yes
Linux operating systems supported	Yes
Weight & dimensions
Width	70 mm
Depth	100 mm
Height	7 mm
Weight	36 g
Package width	142 mm
Package depth	175 mm
Package height	33 mm
Package weight	102 g
Packaging data
Manual	Yes
Package width	142 mm
Package depth	175 mm
Package height	33 mm
Package weight	102 g
Screws included	Yes
Logistics data
Products per master (outer) case	60 pc(s)
Master (outer) case width	502 mm
Master (outer) case length	397 mm
Master (outer) case height	326 mm
Harmonized System (HS) code	84733020
Packaging content
Manual	Yes
Screws included	Yes

StarTech M.2 to SATA Adapter for M.2 SATA SSDs, Dual Slot M2 Drive Host Adapter/Converter with RAID Support, 2.5-Inch Drive Form Factor, TAA

Key Features

• SATA COMPATIBILITY: This drive adapter is compatible with SATA SSD M.2 drives only; B and B+M key M.2 SSDs in 2230/2242/2260/2280 form factors; Supports SATA I, II, and III (up to 6 Gbps) TRIM, and SMART
• COMPATIBILITY NOTE: PCIe M.2 drives (M-key, or B+M key) are NOT supported whether using NVMe or AHCI; Please refer to your drive specs before purchasing; This product only supports M.2 SATA drives
• HIGH PERFORMANCE: Build a high-performance storage setup by installing up to two M.2 SATA SSDs in a 2.5" SATA adapter with RAID support (JBOD, SPAN, RAID 0, RAID 1); Important: JBOD requires a SATA port/controller that supports Port Multiplier
• HASSLE-FREE SETUP: Open-frame steel mounting bracket with 2.5" SATA form factor fits in any 2.5" SATA bay that supports 7mm tall 2.5" drives; Easy to install with all necessary hardware incl. (M.2 drives and screwdriver not incl.)
• TRIM SUPPORT: TRIM support enhances the stability and performance of your M.2 SSDs plus it provides SMART support; TRIM is supported in JBOD and RAID 1, SMART is only supported in JBOD

Description

Create high-performance storage with configurable RAID, by installing two M.2 SATA SSDs into a 2.5” SATA interface

Boost your system performance by enhancing the capacity, speed and security of your data storage. This two-drive M.2 to SATA adapter lets you install two M.2 SATA drives instead of a SATA platter drive, in a single 2.5” drive bay, and increase your storage options by configuring a powerful RAID array.

Build a RAID array to enhance system performance

The dual M.2 to SATA adapter supports multiple RAID modes, including RAID 0, 1, or spanning, helping you to achieve greater SSD capacity or data redundancy, depending on your selected RAID mode. The SSD adapter also supports non-RAID operation (JBOD) when paired with a port-multiplying SATA controller, so both drives can be used independently of one another.

Maximize file transfer speeds

The M.2 SATA SSD adapter lets you utilize the full potential of your SATA III controller. Using M.2 SATA SSDs in place of a platter drive reduces your data transfer bottlenecks, giving you file transfer speeds of up to 6Gbps.

The M.2 NGFF SATA RAID adapter also provides TRIM support to enhance the stability and performance of your M.2 NGFF SSDs.

Easy installation

This open-frame adapter is easy to install as it comes with all the necessary installation hardware and doesn’t require any extra software or drivers, to get you up and running quickly.

The S322M225R is backed by a StarTech.com 2-year warranty and free lifetime technical support.

Specifications

Ports & interfaces
Internal	Yes
Port multiplier	Yes
Host interface	SATA
Output interface	M.2
SATA revision	3.0
Number of M.2 (B) slots	2
Number of SSDs supported	2
Performance
Hot-swap	No
Port multiplier	Yes
Plug and Play	Yes
Chipset	ASMedia - ASM1092R
RAID levels	0, 1, BIG, JBOD
Data transfer rate (max)	6 Gbit/s
Product colour	Red
TRIM support	Yes
S.M.A.R.T. support	Yes
Harmonized System (HS) code	84733020
Design
Hot-swap	No
Easy to install	Yes
Internal	Yes
Product colour	Red
Certification	CE, FCC, REACH, TAA
Features
Plug and Play	Yes
Chipset	ASMedia - ASM1092R
RAID levels	0, 1, BIG, JBOD
Data transfer rate (max)	6 Gbit/s
TRIM support	Yes
S.M.A.R.T. support	Yes
Harmonized System (HS) code	84733020
Operational conditions
Operating temperature (T-T)	5 - 50 °C
Storage temperature (T-T)	-25 - 70 °C
Operating relative humidity (H-H)	15 - 90%
Technical details
Harmonized System (HS) code	84733020
Compliance certificates	RoHS
Weight & dimensions
Width	70 mm
Depth	100 mm
Height	7 mm
Weight	41 g
Package width	172 mm
Package depth	142 mm
Package height	30 mm
Package weight	110 g
Packaging data
Mounting brackets included	Yes
Quick installation guide	Yes
Package width	172 mm
Package depth	142 mm
Package height	30 mm
Package weight	110 g
Screws included	Yes
Logistics data
Harmonized System (HS) code	84733020
Packaging content
Mounting brackets included	Yes
Quick installation guide	Yes
Screws included	Yes
Other features
Chipset	ASMedia - ASM1092R